BMW Motorrad F 800 GS 2013, Rider'S Manual, Page: 111 / 166

Roll the front wheel into posi-
tion between the forks, making
sure that the brake disc passes
between the brake pads of the
brake caliper on the left.
Raise the front wheel and in-
sert axle
4 until seated.
Tighten right axle clamping
screws
1 to the specified tight-
ening torque or install a suit-
able tool to counter-hold for
the next step in the assembly
procedure.
Clamp of quick-release
axle
Tightening sequence: 2x
each side, alternately
19 Nm
Install axle screw 2 and tighten
to the specified tightening
torque.
Axle screw in quick-re-
lease axle, front
30 Nm
Tighten left axle clamping
screws
3 to the specified
tightening torque.
Clamp of quick-release
axle
Tightening sequence: 2x
each side, alternately
19 Nm
If fully tightened beforehand,
slacken right axle clamping
screws
1 again.
Remove the front-wheel stand.
8
109
z Maintenance
ProCarManuals.com