BMW Motorrad C 400GT, Rider'S Manual

Page: 164 / 248

The rear wheel cannot turn.
Install spacer bush
3 .
Install nut
2
and tighten to
torque.
Rear wheel on output
shaft
Thread-locking compound:
mechanical
115 Nm
Install lid 1 .
Remove rubber band from rear
wheel brake.
Insert and position the silen-
cer
7 on the exhaust manifold.
Install bolts 6 with washers and
tighten to the specified torque.
Silencer on swinging arm
21 Nm
Tighten the bolt 4 of the
clamp 5 to the specified
torque.
Rear silencer on exhaust
manifold
25 Nm
Hook in the trim for the silen-
cer
2 on the holders.
Raise the trim for the silen-
cer
2 slightly and insert insulat-
ing disc.
Install bolt
1 .
Fuses
Removing the fuse
Requirement
The fuses are located under the
battery compartment cover on
the legshield.
ATTENTION
Jumpering of blown fuses
Risk of short-circuit and fire
10
162
z Maintenance