BMW Motorrad C 400GT, Rider'S Manual

Page: 116 / 248

DWA adjusting
Requirement
The Scooter is stationary.
Switch on the ignition.
Selecting SETUP (
76).
Briefly press the top part of
the MENU rocker button re-
peatedly until
SETUP DWA
ap-
pears on the display.
Press the bottom part 2 of the
MENU rocker button briefly to
toggle between
DWA ON
3 and
DWA OFF
.
The following settings are avail-
able:
DWA ON
: The DWA anti-theft
alarm is active and will be
armed automatically when the
ignition is switched off.
DWA OFF
: The DWA anti-theft
alarm is deactivated.
Press and hold the top part
1
of the MENU rocker button to
quit
SETUP
.
SETUP ENTER
appears on the
display.
with Connectivity
OE
Switch on the ignition.
Call up the
Settings
,
Vehicle settings
,
Alarm
system
menu.
The following settings are avail-
able:
Adapt
Warning signal
Switch
Tilt alarm sensor
on or off
Switch
Arming tone
on or off
Switch
Arm automatically
on or off
Programming options (
116)
Alarm function
with anti-theft alarm (DWA) OE
Alarm activation
A DWA alarm can be triggered
by:
motion sensor
an attempt to use an unauthor-
ised vehicle key to switch on
the ignition
disconnection of the DWA from
the vehicle battery (DWA bat-
tery takes over power supply)
Alarm signal
A DWA alarm can be triggered
by:
motion sensor
an attempt to use an unauthor-
ised vehicle key to switch on
the ignition
disconnection of the DWA anti-
theft alarm from the motor-
cycle's battery (DWA internal
battery in the anti-theft alarm
provides power - alarm tone
6
114
z Anti-theft alarm