6
6
Operation
LCD Display
Diagram of operation
6.1
Turn on the tester
Press release button (on the top of the tester) to turn on the tester. Then the tester will enter measuring mode.
6.2
Menu
Press and hold key M till “MENU” flashes then enter “DIRE” item. By pressing key M in turn to enter into
item MATE, CONV, AVER respectively. Finally come back to the mode of measurement.
6.3
Impact Directions
After pressing and hold key M to enter item DIRE, press C in turn to change the impact direction.
6.4
Materials
After pressing key M into item MATE, press C in turn to change the materials setting (M1-M2…-M9).
