6
．
Microscope photography and video BMS INVERTED BIOLOGICAL
6-1 Microscope video
18
6-1-1
selecting the light path（fig.31）
★ just used in the trinocular observation
1.
Pulling out the light path selector lever, until
you heard the “clicked”.
★
In the dark specimen observation, you can make
the focus by both eyes at first, then change the
light path.
6-1-2 Installing the video set
（
fig.32
）
1. Loosen the locking bolt
①
on the trinocular
viewing tube, and take out the dust cap
②
.
2. Remove the dust cover on the both ends of the
video accessories
③
, and revolve the screw
head end into the CCD/CMOS port.
3. Install the accessories into the tri-through port,
and screw down the bolt
①
.
6-1-3 Focus
（
fig.32
）
Doing a binocular observation at 20%
brightness, look the image on the video
or the computer which connected with the
microscope video system when the image
is sharp. If it is not in focus, please
turning the revolving video connected
tube④ until the image is sharp enough.
Figure 31
32
1
CCD
video
2
3
4
1
