BMS INVERTED BIOLOGICAL
6-2 Microscope photography
19
6-2-1
selecting the light path
★ just used in the trinocular
observation
The operation diagram is shown in
6-1-1
，
and the details reference is in
4-3-4
。
6-2-2 Installing the photography set
（
fig.33
）
1.
Loosen the locking bolt
①
on the trinocular
viewing tube, and take out the dust cap
②
.
2. Install the photography accessories
③
into the
tri-through port, and screw down the locking
bolts
①
.
3. Inserted the camera gate which on the digital
photography connected head
④
into the
correspond position of the camera set port,
and screw it down clockwise.
5. Plug the digital photo connected head into
the photo tube, then screw down the locking
bolts
①
.
●
Before connecting the camera and adapter,
remove the camera lens firstly, then connect
the lens port with the adapter. Pay attention
to the gate type, please.
●
To avoid the disturbing from the ocular in the
observation, please place the viewer finder
on the two sides of the microscope when
installing the camera set.
●
The camera magnification = objective
magnification ×camera lens magnification
★
When shooting the micrograph, the lens
close will bring an impact in some
camera. In order to weaken the impact,
and obtain a clear image, you could select
a longer time of exposure or decrease the
brightness to have some compensation.
★ This explanation is used for NiKon
Single-lens reflex digital camera
33
1
2
3
4
camera