BMR PLA44, User And Service Manual

Page: 12 / 18

Development and production of systems for measurement and control
6.3. Analyser
Settings related to the device itself such as display parameters, colors, time, password protection and reset of all
settings.
Parameter Description Factory settings Settings range
Display refresh Speed of display refreshing. The optimal setting is 5 cycles.
Brightness Brightness of display for operation while buttons are touched
Standby brightness Defines level of brightness when device is not pressed at any button
Standby time Time delay after that device turns to standby level of display brightness.
Password Four digit password for access to device settings menu
Date and time Device internal clock configuration sub-menu ►
Colors Colors template of particular voltages and currents of phases for graphs
Reset Reset device to the factory settings
6.3.1. Date and time
PLA44 corrects internal clock according to NTP servers while it is connected to Internet. NTP time synchronization
has always priority above the manual clock settings. Clock synchronization by NTP is fully automatic and there is no
need to set anything.
The selection of closest NTP server is adjustable in software PMS. For the finding the closest NTP server refer to the
following link
http://support.ntp.org/bin/view/Servers/StratumOneTimeServers .
Parameter Description Factory settings Settings range
Device time Date and UTC time in format for date YYYY.MM.DD and HH:MM for time.
UTC time offset Time offset of the local time against to UTC. Offset is set in seconds.
Daylight start Beginning of the summer time season
Daylight stop End of the summertime season
Daylight offset Time shift for summertime season
6.3.2. Reset
Reset device to the factory settings. All settings including communication interface configuration will be erase and set
to the factory settings.
6.4. Communication
6.4.1. Ethernet
Menu of settings related to Ethernet interface.
Parameter Description Factory setting Setting range
Ethernet Enable or disable Ethernet interface Yes Yes / No
IP PLA44 IP address in the local network 192.168.001.201
Mask Mask of the Ethernet network 255.255.255.0
Gateway IP address of PC or router used as a gateway to parent network 192.168.001.001
IP - public Public IP address of router 192.168.001.001
Web server Web-server settings advance menu ►
Modbus TCP Modbus TCP settings advance menu ►
FTP server FTP server settings advance menu ►
BMR trading
Horní lán 17
779 00 Olomouc
Czech Republic
12
Tel: +420 778 066 566
export@bmr-trading.com
www.bmr-trading.com