![background image](http://html.mh-extra.com/html/bmpro/batterycheck-series/batterycheck-series_owners-manual_2779844013.webp)
BATTERY STATE OF HEALTH
The BMPRO BatteryCPRO app will provide a State of Health
estimate for the battery being monitored by the BatteryCheck. After
installation, the initial State of Health will be set to 100% and will update
over time as the BatteryCheck learns your battery.
The State of Health estimate depends on the battery capacity entered in
ampere hours (Ah), from when you first added the battery to the app or
change battery parameters. The battery capacity can usually be found
marked on the battery. If you cannot determine the battery’s capacity,
please contact your battery supplier or the battery’s manufacturer for this
information.
The battery’s State of Health indicates the battery’s ability to deliver the
nominal battery capacity entered at set-up.
Important Wiring Information
To accurately estimate the battery’s State of Health, the BatteryCheck must
measure all current in and out of the battery. To achieve this, connect your
battery’s negative terminal to the BatteryCheck negative terminal and
connect all your battery’s input and output loads to the BatteryCheck new
negative terminal. Positive connections are simply wired as normal, i.e. to
the positive terminal of the battery.
FIGURE 5:
Battery State of Health
+ OUT
– OUT
13