4
4
4.1 Activate the BMI
– AutoMagic
Button 1 ON / OFF - Press shortly
Shift the slide of the Pendulum
–Transport lock to the right
The device levels out automatically. The Cross lines of the laser will be illustrated.
Red LED above the On / Off
– button is on, when the pendulum-transport lock is
not disengaged. The laser lines blink slowly.
The self-leveling mode is not activated!
Red LED above the ON / OFF
– button blinks, when the batteries are running on
low capacity and need to be replaced
.
If the automatic leveling function is not possible, e.g. because
the surface on which the measuring tool stands deviates
by more than 4° from the horizontal plane, the laser beams flash slowly
If the laser is used for inclinations, the slide of the pendulum- transport lock has to
be shifted to the left in order to lock the pendulum.
The self-leveling is
deactivated!
The laser lines will blink slowly and the LED above the ON / OFF
–
button is on.
The pulsed laser lines allow the use and work with the receiver
– ex. Outdoor
In order to work with the receiver, press button 2 shortly. The pulse mode is now
activated and verified by the blue LED above the
button 2.
To terminate the pulse
mode repress the
button 2
.
4.2 Selection of the requested laser lines / laser-dots
Button 1
- Press
1 x
Horizontal line is on.
Button 1
- Press
2 x
Vertical line is on.
Button 1
- Press
3 x
All 5
– laser dots are on.
Button 1
- Press
4 x
Laser cross lines and the 5 laser dots will be on.
4.3 Deactivate the BMI
– AutoMagic
Button 1 ON/OFF press long, the laser light will go off.
Shift the slide of the pendulum transport lock safety to the left.
