P/N 033000=13891 7 Rev.15-05-06
1. Introduction
The Take Control is designed to control up to 8 devices:
TV, VCR, CBL (decoder, set top box), DVD, CD, SAT
(satellite receiver), or any other device.. The Take Control
contains a library of codes that are preprogrammed into the
remote control. This library covers nearly all the audio video
products on the market today. The codes have to be
programmed once before use. This can be done in different
ways:
a. Manual entry of one of the codes displayed under the
related brand and type of equipment in the attached code
book (see 4.1)
b. Automatic code search for some well-known brands (4.2)
c. Automatic code search for all brands (4.3)
d. Manual search through all codes (4.4)
X10 IR Link
The IR Link (available separately) gives you the possibility
to control all your audio and video equipment with the Take
Control anywhere in your home. The Take Control transmits
an RF signal to the IR Link Receiver module, which then
transforms this signal into an IR signal, which is sent to your
device. Here are some examples of the uses of the IR Link:
•
Operate the DVD and satellite receiver from the
bedroom, without having to lay any extra cables.
•
Turn up the volume of the radio in the living room while
you are in the kitchen.
The RF signal travels through walls, ceilings and closet
doors. Simply connect the receiver to a wall socket within
sight of your equipment: it could not be easier.
Ask your dealer about the possibilities.
X10 Home Automation: control all electrical appliances
with one remote control
The Take Control Remote has two transmitters: an infrared
(IR) transmitter and a radio frequency (RF) transmitter. This
allows you to operate practically anything. You can operate
your TV, video etc. with the infrared (IR) technology. The
X10 radio frequency (RF) technology makes it possible to
operate lights and appliances from anywhere in the home.
Here are some examples of the uses of the X10 Home
Automation feature:
•
Dim the lights and switch them on and off while
watching TV.
•
Turn the coffee machine on from your bedroom when
you wake up in the morning.
•
Turn your lights on at night to scare off intruders when
you hear noises.
•
Switch on your electric blanket before the movie ends,
so you can enjoy a warm bed once the movie is finished.
•
Switch everything off with a single press of a button
when you go to bed.
2. Insert the batteries (always use new AAA alkaline
batteries).
1. Open the cover on the back of the Take Control Remote.
2. Insert 2 AAA alkaline batteries, verify that they are placed
correctly with the + on the battery in the same position as
marked inside the battery compartment.
3. Close the battery compartment carefully.
