P/N 033000=13891 15 Rev.15-05-06
3. Press the Macro button you want to set (
M1, M2 or M3
).
4. Press the buttons on the remote control you want to enter
under the Macro button (maximum of 10 commands). The
buttons will be executed by the macro in the same order as
they are programmed.
5. To save the macro, you press the
MACRO
button again. If
you have used up the maximum of 10 commands, the
procedure will stop automatically and the 10 commands will
be saved under the Macro button you are setting.
Notes on programming macros
•
The first command of a macro always needs to consist
of a Mode button (TV, VCR, etc)
•
You may have to enter a delay in the macro (e.g. to let
your TV warm up). Press PAUSE (17-22) followed by a
numerical key (1-9) to enter a delay of between 1 and 9
seconds. The standard delay between the separate
macro commands is half a second.
•
The macro buttons can execute both infrared (IR) and
radio frequency (RF) commands. This means you can
activate audio and video equipment and control the
lights at the same time (using a X10 Compatible
Transceiver Modules). This is ideal for Home Theatre
applications. Ask your supplier
for more information.
Clearing a macro button
1. Press the
SETUP
(8) button until one of the Mode LED’s
stays lit. Release the SETUP button.
2. Press the
MACRO
(25) button. The LED will flash once.
3. Press the macro button you want to clear (
M1, M2 or M3
).
4. Press the
SETUP
(8) button again.
4.9 Controlling your house with home automation
modules from X10
The Take Control remote control allows you to command all
electric appliances you have in your house. Here are some
examples that you can do with your Take Control remote
using X10:
•
Switch on/off, dim lights while you watch TV.
•
Switch on the lights at night to frighten intruders when
you detect something suspicious
•
Switch on your electric blanket before the film ends to
have it warm when you go to sleep
You can control the X10 Home Automation Modules as
follows:
1. Press the X10
button .
2. Use the numerical keys to select the Unit Code of the
Module of your choice (1-digit codes do not have to
preceded by a ‘0’).
3. Press the button of the function you want to execute (see
overview below).
Home Automation X10 functions:
On: C
Off: CHANNEL -
Brighter:
Dim: VOLUME -
All lights on:
Power
All units off:
Mute
