7/8
BMB
Art. 6256.065 e-mo-lift 650
Art. 6256.100 e-mo-lift 1000
PROGRAMMING
Constant-touch-mode:
Constantly pushing the up/down button moves the lifting
column up or down respectively. Releasing or pushing any other button of the system
stops the movement. The movement also stops when the max extension/move
back position is reached.
One-touch-mode:
The lifting column moves up or down when the „UP/DOWN“
button is pressed once. When pressed again, the movement will stop.
Switching from constant-touch to one-touch:
Pressing the
„COM" button
on the remote control for 10 seconds will switch
from constant-touch to one-touch and vice versa. When power is interrupted,
the set mode is retained.
This product was designed for you to have the most position options when selecting the highest or
lowest position of the lifting column. In case you do not want to utilize these, please change the settings
using the pushbutton.
To pre-select the highest position:
Starting at the lowest position
push the „UP“ and the „RESET“ button
simultaneously.
After 3 seconds the red LED will illuminate. The lifting column moves up slowly. Once the lifting column
has reached the desired height, release the buttons. The highest position is then set.
To pre-select the lowest position:
Starting at the highest position push the „DOWN“ and the „RESET“ button simultaneously.
After 3 seconds the red LED will illuminate. The lifting column moves down slowly. Once the lifting
column has reached the desired height, release the buttons. The lowest position is then set.
•
The programmed settings for the highest and lowest position remain in place,
even after a power outage.
• The programmed settings for the highest and lowest position remain in place,
even after a RESET.
HOW TO SELECT A LIMIT FOR THE HIGHEST/LOWEST POSITION
TECHNICAL SPECIFICATIONS
Stroke e-mo-lift 650:
650 mm / retracted 570 mm, fully extended 1.220 mm
Stroke e-mo-lift 1000:
1000 mm / retracted 810 mm, fully extended 1.810 mm
Stroke speed:
30 mm/s load-free
Duty cycle:
10 % (approx. 6 min/h or 3 min continuous) under full load
Max load capacity:
60 kg
Overload protection:
8.5 A
Voltage:
110 V / 230 V
Remote control:
2,4 GHZ
VESA:
e-mo-lift 650: 400x400 mm / e-mo-lift 1000: 600x400 mm
