BMB Technology Nano UF Page 5 Installation Manual Download

Page: 5 / 9

FEED WATER CONNECTION

The purpose of the feed water connection is to feed the system with water to be puriﬁed

by tapping into the coldwater supply.

Before you start, please ensure you have turned oﬀ the main water supply and always

ensure there is a bucket or bowl and dry cloth for unforeseen circumstances.

Please see ﬁgure below for instructions on how to make the feed water connection.

Once you have located the cold-water valve, turn the water supply oﬀ then remove

the ﬂexible hose.

Attach the Tubing Feed Water Valve included within the installation kit to the

cold-water valve (please ensure you use the PTFE tape provided around the thread),

then attach the ﬂexible hose to the Tubing Feed Water Valve.

Finally, fully insert the 1/4” tube from the ﬁltration system to the Tubing Feed Water

Valve.

Summary of Contents for Nano UF

Page 1: ...smart water technology BMB ULTRAFILTRATION SERIES INSTALLATION GUIDE Models BMB ZADA ULTRAFILTRATION SYSTEM BMB ZADA PRO ULTRAFILTRATION SYSTEM BMB NANO ULTRAFILTRATION SYSTEM ...

Page 2: ...ING THE BLANK FITTINGS 4 INSERTING THE ELBOW CONNECTORS 4 FEED WATER CONNECTION 5 TAP CONNECTION 6 MOUNTING THE SYSTEM 7 REPLACING THE FILTERS 8 BMB ZADA BMB ZADA PRO 8 BMB NANO ULTRAFILTRATON SYSTEM 8 IMPORTANT NOTE FOR NEW INSTALLATION AND REPLACEMENT FILTERS 9 NOTES 9 ...

Page 3: ...3 PACKAGE CONTENTS Tap Tubing Feed Water Valve Tubing Elbow Connections BMB Zada BMB Zada Pro System Overview Diagram with Tap BMB Nano UF ...

Page 9: ...e ﬁltration system Simply ﬂush the system by letting the water run for 15 minutes then again after an hour or two later Repeat this process a few times and the taste will improve as the ﬁlters would have been ﬂushed Also do bear in mind that the taste will require getting used to as the fresh ﬁltered water will not taste like bottled water nor hard tap water Notes ...