7
MOUNTING THE SYSTEM
Mounting the BMB Zada, Zada Pro and Nano UF is really simple and all you need is 2 x wall
plugs and 2 x screws (not supplied). Please ensure that there is at least 10cm empty below
the bottom of the filter system to ensure you have enough space to pull the filter(s) down
when the filter is due to be replaced.
Simply mark the cupboard for the two holes for your system. You’re satisfied with the
height of the mount location, simply drill the holes, insert wall plugs followed by the screws.
Simply place your system on to the screws. You can tighten the screws for the Zada / Zada
Pro. If the Nano UF is loose, simply tighten the screws a little more until the system is not
hanging loose.
