BMB MEDICAL
–
TIM
–
VERSION 1
44
2
INSTRUCTIONS
FOR
USE
2.1
OPERATING
CONDITIONS
AMBIENT CONDITIONS
OPERATION
Ambient temperature
+5 °C to +40 °C
Relative humidity
20 to 90% at 30 °C - no condensation
Atmospheric pressure
700 to 1060 ha
2.2
INSTALLATION
PROCEDURE
Before commissioning the chair and depending on the model, check that the following are
operational:
-
-
-
-
-
-
Clean the product
according to your establishment’s internal protocol.
2.3
BATTERY
(OPTIONAL)
&
CONNECTION
TO
MAINS
POWER
The electronic unit is equipped with its own charger (the battery is charged with the chair cable).
Before initial use, leave the product to stand for 12 h in a temperate environment (to allow the
electrical and electronic components to reach normal operating temperature), then charge the
battery for 12 hours from a mains outlet.
In routine use, we strongly recommend keeping the chair plugged into the mains during sedentary
use.
The battery, with its limited operating life, can be used to operate the chair in the event of a
power outage, or during transfer.
Once the manipulations are complete, remember to re-connect the chair to the mains (at least
12 hours per day). Never allow the battery to drain fully (risk of reduced battery performance).
“Warning: Do not short
-circuit the batteries and do not leave the system unused and without
charging for extensive periods of time as this could cause self-discharge, leading to medium-
term damage. This will also have an environmental impact. »
