HMXL44-KIT V2
USER MANUAL
07
contact
[email protected] / [email protected]
Matrix Front Panel Control
Front Panel Display - Input/Output selection
The following display shows current source input selection per zone output.
1.
To change input selection first press ‘OUTPUT’ button (1-4)
2.
Press desired ‘INPUT’ button (1-4)
3.
An ‘X’ indicates that the zone output has been turned off.
Zones can be turned on/off using RS-232/TCP/IP commands.
Zone outputs can be forced back on by powering OFF/ON the matrix. All outputs will be turned on when powered up.
Zone outputs can be forced back on by pressing and holding ‘OUTPUT 1’ button on the front panel for 10 seconds. The matrix will
reset and all outputs will be turned back on.
OUT 1 2 x 4
IN
1 2 3 4
EDID:
IN ALL
HDMI:
1080P 2CH
EDID Management - Global or individual input settings
The following characters show adjusting the EDID for ‘All’ inputs (Global). Current EDID value is set to 1080p & 2ch audio.
To change the input signal type using the Matrix front panel buttons press the following:-
Using Matrix Front Panel Buttons
a. Press
MENU
button
b. Panel will display ‘EDID settings’. Press
SELECT
button
c. Select the input you wish to fix the EDID on (1-8) or select ‘All’. Use
UP/DOWN
buttons to toggle selection and
SELECT
button to
confirm
d. Select video resolution required (4K, 1080p, 3D etc). Use
UP/DOWN
buttons to toggle selection and
SELECT
button to confirm
e. Select audio resolution required (2ch, 5.1ch or 7.1ch). Use
UP/DOWN
buttons to toggle selection and
SELECT
button to confirm
f. Press the
ESC
button to exit
2
1
3
4x4 4K HDBaseT™ Matrix - HDCP 2.2