blupura FONTEMAGNA Light, Manual

Page: 24 / 40

24
If payment has not been enabled (see section “4. Enabling/disabling payment”,
page 24), in stand-by mode only SCRIPT 1 will appear. If payment has been
enabled, SCRIPT 2 and 3 will also appear in rotation.
3. PRODUCT NAMING
It is possible to change the name of the product corresponding to each
dispenser button:
PRODUCT NAME 1
STILL 0.5 L
The character to be modified within the product name (STILL 0.5 L) flashes, and
by pressing buttons 1 and 2 on the programming button panel it is possible
to select the new character with which to replace it. Pressing button 3 allows
you to move on to the next character to be modified. Once you have entered
the desired product name, press button 3 repeatedly until you reach the final
character of the string and press 5 to confirm, before moving on to the next
product name.
PRODUCT NAME 2
STILL 1.0 L
PRODUCT NAME 3
STILL 1.5 L
PRODUCT NAME 4
SPARKLING 0.5 L
PRODUCT NAME 5
SPARKLING 1.0 L
PRODUCT NAME 6
SPARKLING 1.5 L
On the Fontemagna Vending with 4 dispensing buttons (2 for still water and 2
for sparkling water) “product 3” and “product 6” do not correspond to any of the
buttons.
Press button 5 to move on to the subsequent functions
4. ENABLING/DISABLING PAYMENT
It is possible to enable and disable the requirement for payment and to associate
a price with each product:
PAYMENT ENABLED
Press button 2 to disable payment; once payment is disabled, it will not be
necessary to insert the card into the reader in order to dispense water. If you
then want to re-enable payment, press button 1. If you have chosen to disable
payment, by pressing button 5 you can proceed directly to the additional
functions (see section “5. Additional functions”, page 25). If payment is
enabled, by pressing button 5 you will access additional payment settings: