Blumfeldt 10035942, Manual

Page: 57 / 162

57
EN
20
Step 1: Connect end (M) of the light
cable of beam (B2) with end (W) of
the light cable of beam (C) and then
tighten the screw cap. Except for
the connection point of beam (B1)
and (C), the other light cables must
be connected in the same clockwise
way.
Step 3:
Attach the power supply
to the beam (C) with the screws
(K5). Adjust the light color
according to the illumination
with the remote control (P).
Step 2 : Attach the male end (M) of the bar (B1) and the female end (W) of
the bar (C) to the power supply separately. Then tighten the screw caps
on the end of the light cables.
(W)
(W)
(M)
(M)
(M) & (W) verbinden