Blumfeldt 10034280, Manual

Page: 33 / 40

33
EN
MAINTENANCE
To enjoy years of outstanding performance from your appliance, make sure
you perform the following maintenance activities on a regular basis.
• Keep exterior surfaces clean.
•
Use warm soapy water for cleaning. Never use flammable or corrosive
cleaning agents.
• While washing your unit, be sure to keep the area around the burner and
pilot assembly dry at all times. If the gas control is exposed to water in any
way, DO NOT try to use it. It must be replaced.
• Airflow must be unobstructed. Keep controls, burner and circulation air
passageways clean. Signs of possible blockage include:
• Gas odor with extreme yellow tipping of flame.
• The appliance does NOT reach the desired temperature.
• The appliance glow is excessively uneven.
• The appliance makes popping noises.
•
Spiders and insects can nest in burner or orifices. This dangerous condition
can damage the appliance and render it unsafe for use. Clean burner holes
by using a heavy duty pipe cleaner. Compressed air may help clear away
smaller particles.
• Carbon deposits may create a fire hazard. If any carbon deposits develop,
clean dome and engine with warm soapy water..
Note: in a salt-air environment (such as near the sea), corrosion occurs more
quickly than normal. Frequently check the corroded areas and repair them
promptly.
Battery replacement
Remove impulse
ignition cap from below
Ignition by turning cap
counterclockwise. Install
1 AAA battery. Negative end
of battery goes in first, then
replace impulse ignition cap
by turning cap clockwise.
Battery Cap