Blumfeldt 10034280, Manual

Page: 32 / 40

32
EN
USE
Before first use and after every gas cylinder change, gas delivery system
must be purged of air before igniting! To do this, turn the control knob anti-
clockwise to the pilot setting. Press knob in and hold for about 2 minutes
before attempting ignition..
To light the pilot
• Check all connections prior to each use.
• Turn on main gas supply at source.
• Press to turn control knob anti-clockwise to PILOT, see right photo.
•
Hold knob depressed, press IGNITION button repeatedly until pilot flame
is lit, then continue to hold the knob depressed for 10 seconds until the
pilot remains it after releasing knob.
• If pilot fails to ignite or alight, press to turn knob clockwise to OFF and
repeat.
To light the appliance
• The pilot should be lit and the knob set to PILOT.
• Hold knob depressed gently and turn anti-clockwise to HIGH.
• When the appliance glows lit, turn knob clockwise from HIGH to LOW as
needed.
Re-lighting
• Turn Control Knob to OFF.
• Wait at least 5 minutes, to let gas dissipate, before attempting to re-light
pilot.
• Repeat the “Lighting” steps.
To extinguish
• Hold knob depressed & turn the knob clockwise to ‘OFF’
• Close the valve of the gas cylinder or the regulator after use.
• Close the gas bottle and allow this appliance to cool before moving the
appliance.
Note: Close regulator after use, allow the appliance to cool before moving.
Note: When the appliance is not in use, turn the gas cylinder OFF.