Operation
Assembly
This solar pump is designed primarily to operate in sunlight hours and always charge extra
energy to battery to allow use later “on demand” in cloudy day or night time. The pump will
turn to solar mode automatically on next day in sunlight hours. The pump will never run on
battery mode until your press the button.
Usage of this solar pump:
Use this pump way 1: Rotate the switch to “I” position, the pump will run every day by solar.
Use this pump way 2: Rotate the switch to “O” position and charge the full solar energy to
battery during sunlight hours, the battery system charges to allow use later of “on demand”.
•
Unpack all components carefully.
•
Place reservoir on top of base and twist the reservoir clockwise to fit together.
• Connect the pump cable to the socket of the rear side of solar panel, connect the tube
between the vent of the DC pump and the rear middle side of the solar panel.
•
Pour enough water to the fountain birdbath and make sure the pump is fully submerged
in water when place the solar pump on the birdbath.
•
Connect sprinkle heads to fountain head of the middle side of the solar panel as required.
8
