- 31 -
Blumax GPS Tracker V1.0
En
Remarks:
this SMS-Command is to set initial characters for SOS message
when SOS/IN1, Button B/IN2, Button C/IN3 is pressed.
P=1,
SOS button/Input1
P=2,
B button/Input2
P=3,
C button/Input3
Char is the character in SOS message and max 32 characters and defaul-
ted as:
1 SOS Alarm!
2 Cry For Help!
3 Call The Police!
Set pre
fi
x (country
code)
W******,502,*Data#
W000000,502,*+86#
Remarks:
be advised caution in this setting. Normally, your country code
(for example in China it is +86) will be automatically added and displayed
prior to a phone number when sending SMS. In this case, you don’t have
to do this setting. If the country code is not added, you are required to input
the country code, for example, +86, to enable the tracker can send out SMS
to your mobile phone.
Data: max 10 digits
Get version No.
and serial No.
W******,600
W000000,600
Remarks:
to get the version and serial number of tracker’s
fi
rmware
Get IMEI
W******,601
W000000,601
Remarks:
to get IMEI of the tracker
Reboot GSM
W******,901###
W000000,901###
Remarks:
to reboot the GSM module of the tracker
Reboot GPS
W******,902###
W000000,902###
Remarks:
to reboot the GPS module of the tracker
Initialization
W******,990,099###
W000000,990,099###
Remarks:
Turn on the device, press the SOS button for
fi
ve times continu-
ously and the red LED will be on, and then send (within 120 seconds) this
SMS to the tracker to make all settings (except for the password) back to
factory default.
### is the ending character.
