- 9 -
Blumax GPS Tracker V1.0
En
First Use
4.3
Please read this manual before using your BLUMAX GPS-Tracker V1.0
Ensure that your BLUMAX GPS-Tracker V1.0 has a working
4.3.1
SIM installed.
Check that the SIM has not run out of credit (Test the SIM in a phone to make
sure it can send and receive SMS)
Check that the SIM lock code is turned off
If you require the function of sending an SMS location report to the authorized
phone number when it makes a call to the BLUMAX GPS-Tracker V1.0, please
make sure the SIM installed supports displaying caller ID.
Put the battery in BLUMAX GPS-Tracker V1.0 and charge the
4.3.2
tracker for at least 3 hours in power-off status using the wall charger
or car charger. Or you can connect the tracker directly to computer
by USB. Red light is on during charging and is off when charging
is complete.
Press and hold the
4.3.3
Power On/Off button for 3-5 seconds to
activate BLUMAX GPS-Tracker V1.0 and it will then enter standby
mode. It is suggested that you be in an outer place where it can
receive better GPS when you turn on the device.
Check that the Red LED (Battery) is
fl
ashing
1 sec. on and 2 sec. off.
Check that the Green LED (GSM) is
fl
ashing 0.1 sec. on and 2.9 sec. off.
Check that the Blue LED (GPS) is
fl
ashing
0.1 sec. on and 2.9 sec. off.
5. Change Password
SMS-Command
: W******,001,######
Description
: Changes user’s password.
Notes
:
****** is user’s password and the default password is 000000. The
1.
tracker will only accept commands from a user with the correct pass-
word. SMS-Commands with wrong password will be ignored.
###### is the new password. Password should be 6 digits.
2.
Example
:
W000000,001,123456
W123456,001,999999