15
BA-092/0EN MZK.1900/8800
4 - Working with the drilling head
4.9 - Using the locating pins to send to the next cycle
Recommendation:
Use locating pins
(1.1)
for short system drillings for
sending to the next cycle. If long system drillings are
used, then use several stops and position them using
the setting template (MZK.1906 EINSTLE) (4.6). This
will ensure a higher degree of accuracy over the long
length.
• Move locating pins
(1.1)
downwards and centre in the last drill-
ing of the previously made system drilling.
• Drilling see point 4.8.
• Attach extension ruler
• Position setting template on the swivel stop
(4.5)
.
• Position swivel stop
(4.5)
on the extension ruler. The distance
is provided by the setting template
4.6
.
• The template (MZK.1906 EINSTLE)
(4.6)
is optional and not
included as a standard part when the drilling heads are deliv-
ered.
4.10 - Using the setting template to send to the next cycle
1.1
4.6
4.5
!