14
BA-092/0EN MZK.1900/8800
4 - Working with the drilling head
4.6 - Sliding the workpiece to the stop
• Loosen clamping screw
(4.7)
.
• Set the clamps so that the distance x between the workpiece
side (AH) and the clamp guard is a max. of 3 mm.
• Leave a min. of 1 cm distance between hold down clamp and
drilling head (y).
• Secure clamping screw
(4.7)
.
4.7 - Setting clamps to the material thickness
• Main switch
(4.1)
on
• Hold down clamp
(4.2)
at Pos "ON."
• Hold down work piece outside of danger area and press
against the stop.
• Press feed switch
(4.3)
until drilling depth is reached.
• During drilling, locating pin
(1.1)
is again moved to the starting
position
4.8 - Drilling
ATTENTION
Be sure to remove any objects from the work area
(A) of the machine, except the work piece!
Keep your hands out of work area (A).
Y
X
4.7
AH
A
AH