Using the installation instructions
⇒ Please read the installation instructions and safety information before SERVO-DRIVE for AVENTOS start-up.
⇒ We recommend that you use the orientation diagram for easier identification of the parts being described.
⇒ These installation instructions are for the AVENTOS HF, AVENTOS HS, AVENTOS HL and AVENTOS HK lift
systems.
However, only AVENTOS HF is used as an example in the illustrations.
⇒ Please see the special AVENTOS installation instructions for the assembly steps of the mechanical AVENTOS HF, HS,
HL and HK lift systems without SERVO-DRIVE.
Safety
SERVO-DRIVE for AVENTOS complies with current safety standards.
Nevertheless, there are certain risk factors if these installation instructions are
not followed. Please be aware that Julius Blum GmbH is not responsible for
incidental or consequential damages that may arise due to non-compliance
with these installation instructions.
Principle
Intended use
SERVO-DRIVE for AVENTOS supports the opening and closing of lift systems
in furniture and may only be used under the following conditions:
• In dry, enclosed rooms.
• In combination with AVENTOS lift systems from Julius Blum GmbH within per-
mitted technical specifications.
• In combination with a Blum transformer.
Warning signs and
danger symbols
DANGER
Danger:
The DANGER sign indicates important safety information
that must be followed. If this information is not followed, this
could lead to serious injury or death.
WARNING
Warning:
The WARNING sign indicates important safety information
that must be followed. If this information is not followed, this
could lead to injury or property damage.
CAUTION
Caution:
The CAUTION sign indicates information that if not followed
may lead to property damage or premature wear.
NOTICE
NOTICE:
The NOTICE sign indicates information that should be
followed.
3
