25
V1.1
SmartBus P900-TI6N USER MANUAL
L
E
D
6. Press
[#]
key to exit and keypad audible indicator will sound 2 beeps.
ZONE 1
indicator
AC Loss
ZONE 2
indicator
Real Time Clock Loss (Program System Timer - refer to page 38)
ZONE 3
indicator
Siren Fail
ZONE 4
indicator
Battery Low Voltage
ZONE 5
indicator
Telephone Line/GSM CMS Reporting Fail
ZONE 6
indicator
Telephone Line/GSM Personal Reporting Fail
ZONE 7
indicator
Telephone Line Connection Fail
Remark: Zone 1, 2, 3 and 4 indicators will only be extinguished after the troubles are restored.
Zone 5, 6 and 7 indicators will be extinguished when they are viewed once.
[8]
(Press and hold down for 2 seconds)
1. The system alarm memory will store the most recent alarm condition. An alarm condition
will cause the following events.
2. The
MEMORY
indicator slow flash.
The
MEMORY
indicator will extinguish once the user enters
VIEW ALARM MEMORY
mode.
3. Press and hold down key
[8]
for 2 seconds. The
MEMORY
indicator will turn ON and
keypad audible indicator will sound 2 beeps.
4. One or more
ZONE
indicators will turn ON to indicate the zones that cause the most
recent alarm.
5. Press
[#]
key to exit and keypad audible indicator will sound 2 beeps.
The chime mode allows user to monitor nominated zones while the system is disarmed. The
audible indicator will sound briefly when the nominated zone is violated
– the siren will NOT
sound. If you wish to know there is someone enters or exits the front door, the keypad will beep
once when the door is opened provided the zone is a chime zone.
[9]
+ [ZONE NUMBERS] + [#]
(Press and hold down for 2 seconds) (1 to 16)
1. Press and hold down key
[9]
for 2 seconds.
2. The
POWER
and
KEYLOCK
indicators will slow flash and keypad audible indicator will
sound 2 beeps.
8.10 VIEW ALARM MEMORY
8.11 CHIME MODE
