5
NMF1010
LED
NEON FLEX
(8)
Products and Tools
Cutter
LED power supply
Electric iron
Electric drill
Closing-end cap installation
First put some glue inside of the plug, then
push into the strip light
At welding part, note the positive and negative poles of lines and board; positive to positive and negative to negative.
Each connection point must use 10g silicone glue, and add waterproof and insulation treatment;
The customer selects the appropriate operations according to actual needs;
Please handle with care during the installation. The corners should meet the minimum bending diameter of the product, and you need to use our matching accessories to install,
so as to avoid unnecessary losses to you;
If you don’t know enough about the product, please feel free to consult before buying. We will consider it for you and try our best to bring you a good buying experience;
Wipe off the excess glue and wait for
the glue to solidify.
-
-
-
-
-
Installation
Front cap installation
Weld the wire to the PCB board.
First put waterproof glue inside of the end
exit, then push into the strip light.
Wipe off the excess glue and wait for the
glue to solidify.
Aluminum channel installation
Fix the installation channel with screws
Put the strip into the channel
Finished
