Installing the SPT Junction Box
The SPT junction box contains a USB to RS-485 converter plus a USB flash drive.
The converter will add a COM port to the PC for communicating with the pan and tilt.
The drivers for the converter need to be installed onto the PC. These drivers are
located on the USB flash memory drive located in the control box.
There are two drivers to install: one is for a “USB Serial Converter”, and the other
is for a “USB Serial Port.”
1. Connect the USB port on the control box to an available USB port on the PC. The
“Found New Hardware Wizard” will guide you through the installation process.
BV-3100 User’s Handbook
15 April 2009
Page
10
NOTE
:
Do not close the second “Found New Hardware Wizard” window while
installing the driver.
NOTE
:
For Windows Vista, disconnect your PC from the internet before installing
drivers; otherwise, Windows Vista will search for and install the drivers automatically
from Windows Updates and cause errors. The instructions below are for Windows XP.
Installation for Windows Vista may vary from the instructions below.
