background image

In implementing Directive 2006/66/EC on the reduced use of hazardous substances
in batteries and the disposal of the same.

The crossed bin symbol on the appliance or its packaging indicates that the batteries must
not be disposed of with the rest of the household waste, as they may contain substances
that are potentially harmful to the environment and health. Remove the old battery from the
device and turn it in at the appropriate collection points.

Disclaimer

This manual is intended to provide a brief summary of our knowledge and some guidance
regarding the use of the device and its accessories. The information contained herein has
been provided by sources that BlueUp S.r.l.s. considers to be dependable and is accurate
to  the  best   knowledge  of  the  company.  This  sheet  is not  intended to  be  an  inclusive
document on worldwide hazard communication regulations. The information is provided in
good faith. Each user of this material needs to evaluate the conditions of use and define
the   appropriate   protective   mechanisms   to   prevent   the   exposure   of   persons,   property
damage or release to the environment.

BlueUp S.r.l.s. assumes no responsibility for injury to the recipient or third persons,
or for any damages resulting from misuse of the device and its parts.

BlueUp S.r.l.s. - 2018

V1.0– 26/06/2018

4/28

Summary of Contents for BlueBeacon Gateway D





























Reviews: