WLAN SSID: the name of the wireless network to which BlueBeacon Gateway will have to
connect
WLAN Password: the access password for the wireless network
Once you have configured the network interfaces, you will need to press the Save button
to save the configurations. To apply the new network configurations it is necessary to
restart the BlueBeacon Gateway (reboot using the appropriate button on the drop down
menu located on the topbar).
At the next restart, you can verify that the new network settings have been correctly
applied also through the System Info page, in the Network Interfaces section (Figure 7).
BlueUp S.r.l.s. - 2018
V1.0– 26/06/2018
11/28
Figure 5: System Info