5.2 Power On
Step1:
Switch on the DC circuit breakers on EP600.
Step2:
Switch on the DC circuit breakers on B500 battery packs. Press and hold
the power button of any battery pack for 3 seconds and the green indicator on
the button lights up.
Step3:
Wait for 40 seconds until the green indicator of the inverter is always on.
Step4:
Switch on the AC circuit breakers connected to the EP600 grid port.
Step5:
Power on the system via the BLUETTI app. For details, please refer to
Setting section on App Manual.
Step6:
Check the voltage of BACKUP.
Step7:
Switch on the AC circuit breakers connected to the EP600 load port.
END,Then you can check the EP600 system status through the app.
5.3 Power Off
Step1:
Turn off the AC power on BLUETTI App.
Step2:
Switch off the AC circuit breakers which are connected to EP600 grid port
and load port.
Step3:
Switch off EP600 PV switch.
Step4:
Press the power button on any B500 till the indicator on the button flashes
green.
Step5:
The indicator on the B500 continues to flash.
Step6:
When the indicator is off, B500 battery packs turn off.
Step7:
Switch off all B500 manual switches and the system powers off.
Warning
Wait at least 30 minutes after powering OFF the system before
performing maintenance or inspections, as this may cause
electric shock or burns.
JUST POWER ON
71
