35
Chapter 10 System Time
This chapter provides information about system time setting. Figure
10.0.1 shows the architecture of the system time menu.
Figure 10.0.1 System time menu architecture
In the main Menu, press
or
to scroll to
System time
and
press
to select it. The System time menu is displayed, as shown in
Figure 10.0.2
Figure 10.0.2 System time menu
Time Setting
SNTP Setting
Select
Back
System Time
Polling Time
SNTP Status
TimeZone Setting
SNTP Setting
Time Setting
SNTP Server 2
SNTP Server1
Clock Settings
SNTP Server 4
Date Settings
SNTP Server 3
36
10.1 Time Setting
Press
to select clock settings or date settings.
10.1.1 Clock Settings
Press
to select set clock value and timer format. There are 2 types
(24-hour, 12-hour) can select of timer format.
10.1.2 Date Settings
Press
to select set date value and date format. There are 3 types
(YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY) can select of date
settings.
10.2 SNTP Setting
10.2.1 TimeZone Setting
This submenu includes Time Zone and Daylight Saving configuration.
You can select the time zone in which you are located from the time zone
list. You can disable or enable the daylight saving function. If you want
to use daylight saving function, you also need to set the daylight saving
duration setup, from the start month/date to the end month/date, in this
10.2.2 SNTP Status
You can disable or enable the function of synchronizing WIFI PHONE’s
time to SNTP servers.
10.2.3 Polling Time
You can set the polling time of the WIFI PHONE for how often to get
time information from SNTP servers.
10.2.4 SNTP Server 1 to 4
You can set the IP addresses of SNTP server 1 to server 4 here.
