![background image](http://html.mh-extra.com/html/bluetechnix/argos3d-p100/argos3d-p100_user-manual_2778417010.webp)
Hardware User Manual - Argos3D – P100
Last change: 22 August 2013
Version
1.5
4
Hardware Installation
Caution
Cooling plate may become hot!
If the Argos
3D
- P100 is used without any additional heat sink attached to the cooling plate, the
recommended minimum spacing between casing and surrounding is 10mm in each direction.
Note
By mounting the camera onto a heat sink, it’s allowed to decrease the recommended minimum
spacing. In this case the customer is responsible for an adequate cooling.
Figure 4-1: Recommended minimum spacing for air circulation
© Bluetechnix 2013
Page | 9