LISTEN TO AM/FM RADIO
1.
Press the
FUNCTION
button
(17)
to the
RADIO
setting. The current radio station will
be shown on the
LCD Display (9)
.
2.
Press the
STOP /
BAND
button
(3)
to your desired setting (AM or FM).
3.
Use the
NEXT / F.FWD (2)
or
PREVIOUS / F.REV (1)
button
to select the desired
Radio station.
•
TIPS FOR BEST RECEPTION
o
The AM antenna is built-in to the cabinet of this player. To improve
reception of radio stations simply move the entire player to another
location until reception improves.
o
The
Telescoping Antenna (27)
can be adjusted for FM reception.
When listening to a FM station fully extend the antenna and slowly rotate
it until reception improves.
SETTING RADIO PRESETS
This unit can store 20-FM & 20-AM radio stations in the Preset memory. To store preset
stations follow the steps below.
1.
Use the
NEXT / F.FWD (2)
or
PREVIOUS / F.REV (1)
button
to select the desired
Radio station to be programmed.
2.
Press the
PLAY MODE /
PROGRAM
button
(7)
“
P01
” will begin flashing in the
LCD
Display (8)
3.
Use the
FOLDER / MEMORY Knob (14)
to set the desired Preset number (1-20).
4.
Press the
PLAY MODE /
PROGRAM
button
(7)
to enter the radio station into the
Preset memory.
5.
Repeat steps 1-4 to enter additional radio stations into the Preset memory.
To tune directly to your Radio Presets simply use the
FOLDER / MEMORY knob (14)
to
cycle through the Presets stored in the memory.
USB PLAYBACK
This unit can play MP3 files from a USB flash drive.
1.
Insert a USB flash drive into the
USB Port (10)
2.
Press the
FUNCTION
button
(17)
until the
LCD Display (9)
shows “
USB”
. The unit
will automatically start reading the files stored on the USB flash drive. When reading
has completed the total number of songs on the USB flash drive will be shown on the
LCD Display (9)
.
3.
Press the
PLAY / PAUSE / FM STEREO
button
(5)
to start playing your MP3 files.
•
NOTE
: if you have MP3 files stored in multiple folders on your flash drive you can
use the
FOLDER / MEMORY Knob (14)
to cycle through the individual folders.
Each time you adjust the
FOLDER / MEMORY Knob (14)
the unit will skip to the
next folder on the flash drive.
CASSETTE PLAYBACK
1.
Press the
FUNCTION
button
(17)
until the
LCD Display (9)
shows the
“TAPE”
setting.
2.
Press the
CASSETTE STOP / EJECT
button
(23)
to open the
Cassette Door (18)
.
3.
Insert a cassette so the tape side of the cassette is inserted into the bottom of the
Cassette Door (18)
.
4.
Gently push the
Cassette Door (18)
inward until it fully closes.
5.
Press the
CASSETTE PLAY
Button
(20)
to begin playback.
a. To REWIND the cassette press the
CASSETTE REWIND
button
(21)
b.
To FAST FORWARD the cassette press the
CASSETTE FAST FORWARD
button
(22)