Bluestone RCB-5939, User Manual

Page: 12 / 13

FAULT DETECTION
MALFUNCTION POSSIBLE REASON SOLUTION
Indicator light cannot be
turned on.
Power is off.
Check whether power cord
is well connected.
Circuit failure. Send to After-sales service.
Heating element does not
heat.
Circuit failure.
Send to After-sales service.
Fusing.
Heating element has prob-
lem.
Indicator light is on but
heating element does
not heat.
Circuit failure.
Send to After-sales service.
Heating element has prob-
lem.
Rice is rare.
Too much or too less ingre-
dients in the inner pot.
Change the proportion of
water and rice, between
Min and Max scale.
Proportion between water
and rice is not proper.
Change the proportion of
water and rice.
The inner port is not in
right position.
Rotate the inner pot slightly,
get it in right position.
Foreign matters between
inner pot and heating el-
ement.
Remove foreign matter, do
not clean it with water.
The inner pot is deformed.
Send to After-sales service.
Circuit failure.
Sensor has problem.
Rice is overcooked.
The inner pot is not in right
position.
Rotate the inner pot slightly,
get it in right position.
The inner pot is deformed.
Send to After-sales service.
Circuit failure.
Sensor has problem.
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the
non-working electrical equipments to an appropriate waste disposal
center.
Warm mode starts auto-
matically before cooking
process finished.
The inner pot is not in the
rice cooker.
Cut off power supply, the
rice cooker can work normally
again after cooling itself.
Heating while no water in
the inner pot.
The inner pot is not in right
position.
Overflow when cooking
porridge.
Too much ingredients inside
the inner pot.
Adjust quantity of the in-
gredients.
Display on the screen is E1/
E2/E3/E4/E5.
Circuit failure.
Cut off power supply and try
it later, if malfunction again,
send to After-sales service.
ENGLISH ENGLISH
22 23