Frequency:
50Hz | 60Hz
This option should be set according to the power supply
specification used in your country or geographical
region. for example, USA users should select 60Hz,
Europe 50Hz.
Choosing the correct value will reduce flickering caused
by incandescent/fluorescent lamps at night time. LED
traffic lights may still flicker as these use different
frequencies.
Beep Sound:
On | Off.
Controls all buttons notification sounds, if you set
Beep Off, then you can still hear the voice prompt
warnings. Voice prompt warnings are useful to notify
the driver of microSD card errors, missing microSD
card etc.
Format:
Formats the microSD card ready for use with
the camera.
Warning:
This operation will delete all existing data
on the micro SD card, including locked files and normal
looping recording files! Make sure you back up any
important files first.
Default Setting:
Resets all settings to the factory default settings.
Version:
Displays the version number of the currently
installed firmware.
GPS:
Off | On
(Only available with optional GPS Module connected)
Turns On / Off the GPS logging.
An optional GPS module is used to record the location
and speed data in the recorded videos. If disabled,
your camera will no longer measure your speed,
position, or synchronize the time.
Note: For correct synchronization with GPS time, the
time zone and Daylight Savings adjustment must be
correctly set using the Time Zone menu.
Speed Unit:
Off | GPS KM/H | GPS MPH
(Only available with optional GPS Module connected)
Sets the measurement units for the vehicle speed
overlay on the recorded video.
Time Zone:
(Only available with optional GPS Module connected)
Sets the current time zone and Daylight Savings offset
if required for GPS time and date synchronization.
Notes:
The default time zone is GMT-0 London city. Set
your local time zone, for example, GMT -8 Los Angeles,
and adjust for Daylight savings if required by adding 1.
The GPS module is not a standard accessory for the
B2W camera, it must be purchased separately.
31
32
