1. The camera will power on automatically shortly after
the ignition is switched on.
2
.
The Camera will power off automatically when
ignition is switched off.
3. For manual power on/off, press and hold the lock
button for 5 seconds. (When powering on, the screen
will take a further 6 seconds to illuminate.)
Power on/off:
1. The camera will start recording automatically shortly
after the ignition is switched on. The Red LED indicator
light will flash while actively recording.
2
.
Short press the button to start recording manually
when in Standby mode.
Start recording:
1. The camera will stop recording automatically when
the ignition is switched off.
2. Short press the button to stop recording manually
when in recording mode.
Stop recording:
1. In recording mode: Short press the
button to
take a photo. (The current video file will be locked
at the same time.)
Take a photo:
1. In recording mode: Short press button to lock a
video clip manually. This will lock the currently recording
video clip.
2
.
In recording mode: Short press button to lock a
video clip manually. This will lock the currently recording
video clip.
3. Video clips will be locked automatically when the
G-sensor is triggered. The sensitivity of the G-Sensor
can be adjusted in the settings by pressing the
button.
Lock video clip:
1. Select standby mode.
2
.
Short press the button to enter Playback mode.
3. Short press or button to select a video recording,
and then press the REC button to playback the
selected video or photo.
Playback on camera
1. Remove the microSD card and Connect to the
computer USB socket via a microSD card reader.
Once connected, open a file browser and navigate
to the SD card.
Or connect the camera to a computer USB socket
by using the supplied short USB data cable. The
camera will automatically turn on and "Mass Storage"
will be displayed on its LCD screen. Once connected,
open a file browser and navigate to the SD card.
Playback on PC
22
21
Basic Operation
Video playback
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
