Blueshape PG700E, Operating Manual, Page: 13 / 20

11
To use the device in UPS mode:
1. Connect the provided IEC 60320
C13 lead into the socket labelled
‘charge in’.
2. Connect a compatible mains
cable to socket labelled ‘AC
Output’.
3. Press the switch to the on
position.
Use this mode as necessary, unless a mains output is
required. Switch off the mains output when charging
the device to ensure its longevity
.
Operating the Device in Online UPS Mode - 200W
This power-generator can also function as an Online UPS, only if the
electrical load is less than 200W.
Loads larger than 200W will eventually deplete the internal batteries
nonetheless.
The display will show a charge remaining bar and will indicate the
estimated time until fully charged.
If the AC input via the ‘charge in’ socket is interrupted, the AC output will
be uninterrupted and maintained until the charge is depleted.