Blueshape PG700E, Operating Manual, Page: 11 / 20

9
To use the mains output:
1.
Connect a compatible mains
cable to socket labelled ‘AC
Output’.
2. Press the switch to the on
position.
Be sure that the electrical load does not exceed the
maximum power rating of the power-generator.
Operating the Device in Inverter Mode
The display will show a charge remaining bar and will indicate the
estimated time till complete charge-depletion. In the second display
row, an indication of the operational power relative to the maximum
power rating is shown.
The last line of the display shows warning or error codes such as
warning when the charge has reached a low-level. Refer to the error
code section for further details.
Unless the device is equipped with a universal mains
socket, be sure to match the mains cable with the
socket fitted in the device.