Blueshape PG700E, Operating Manual, Page: 10 / 20

8
To charge the device:
1.
Switch off mains output switch
2. Connect the provided IEC 60320
C13 lead into the socket labelled
‘charge in’.
Use silent charging only when necessary, cooling the
internal electronics during charging will ensure the
longevity of the device.
Operating Instructions
This section details the operational procedure for this power-generator.
The last sub-section details the different statuses, warnings and errors
shown on the display.
Charging the Device
Note: Charging will still work with the mains output active or idle.
Unless the inverter functionality is required, switch off mains output to
ensure pack longevity.
The display will show a charge progress bar and will indicate the
estimated time until fully charged.
To activate silent charging press the fan switch to the off position to
disable the fan during charging.