v1.7 - Jun 2019
21 |
P a g e
V10 hardware
V11 and V12 hardware
You will also need to establish a serial connection. You can test your serial connection using the BFV
Desktop application or a terminal emulator like Realterm:
Bluetooth version: you should add the vario as a device to the PC (you might need to use
code 1234 to pair it via the Devices and Setting menu, it depends on your Bluetooth
adapter). You will need to work out what serial port it was assigned by looking at its
properties.
TTL_GPS version: you will need a TTL to serial adapter. Depending on how you installed the
TTL_GPS you might need to solder things. Again you need to work out what serial port the
TTL to serial adapter has been assigned.
USB version: the serial port is assigned when the device is first connected to your PC.
Step 3 - Open the ds30laoder application
Open up the ds30loader application. Adjust the settings to match the following:
Hex file: Browse to the location of the firmware hex file you downloaded (make sure to
unzip it)
Device: PIC24F
Model: 32KA301
Baud: 57600 (or 115200 from v11 hardware)
