2
1.0 Product information
The BlueChimney remote control replaces the speed adjustment which automatically comes with the
BlueChimney smoke exhauster. The receiver unit of the remote control is placed in a lid which fits the
black ceiling box which comes with the standard unit and is easily replaceable. The signal is encrypted
and coded so other electronical units won’t interfere with the use of the sender. The draft in the
chimney is regulated either automatically or manually if needed. After the last push of the button the
unit will automatically be switched off after approximately 4 hours.
1.1 Content
1. Hand-held sender unit.
2. Receiver unit to replace speed adjustment and lid on black ceiling box.
1.2 Use
BlueChimney Remote Control is used as a replacement for the wired speed adjustment.
1.3 Functioning
BlueChimney smoke exhauster works both fully automatically and manually:
Fully automatic control:
When lighting the fire/relighting, the Start/Boost-button O is activated by one push before lighting the
fire in the fireplace.
The first 20 minutes:
The BlueChimney starts by boosting the draft for 20 minutes so that smoke in the living room can be
avoided when lighting the fire. Afterwards, the speed is halved automatically.
The process of the next 2 hours:
BlueChimney runs half speed so the wood burning stove burns most economically and pollutes as
little as possible. After two hours the speed is automatically set at a minimum.
After two hours more:
BlueChimney switches off automatically.
Relighting the fire:
Push the “Start/Boost” O button before relighting the fire/adding wood to avoid smoke. This way, the
automatic starts over as a new burning sequence of 4 hours and 20 minutes.
Manual control:
The automatic can always be annulled either by pushing ”more draft”
, ”less draft”
or the ”off”
button. The BlueChimney switches off automatically approximately 4 hours
after you pushed a button.
English
