6
Collecting data from guard tour readers
Compatible readers include models PG-2002S, PG-2002F, PG-2002-W.
Ø
Turn on the PG-3300
Ø
Set the reader into the indentation on the PG-3300. For reader model PG-2002S,
please place its reading head between the status lights, and set its top flush against
the inside edge of the PG-3300.
Ø
If there is data that needs to be transferred from the reader to the PG-3300, its
blue LED light will start flashing rapidly, indicating that data is being transferred.
When the transfer process is complete, the PG-3300 will make one long beep,
then one short beep periodically every few seconds, indicating that the reader
connected no longer has any data to upload, and should be removed. If you have
another reader that needs to have its data transferred, please place it in the unit at
this time.
Ø
If the PG-3300 makes three short beeps, it means that its memory is full, and will
need to have it uploaded before being able to collect any more data from readers.
Remote data upload
After 30 seconds of finishing data collection from the reader (the upper-left red LED
turns on indicating the PG-3300 has data needs to be uploaded), the PG-3300 Station
is turned into GSM module and ready to send data via GPRS. If the GSM module
configuration succeeded, the blue LED could keep flashing. Meanwhile, the station
makes 1 short beep. If the station failed to connect with GSM network, it makes 4
long beeps and shuts down immediately.
If station has been succeeded connect with GSM network, it will try to connect with
the server computer via GPRS, and wait for response from Server. If the Server
response has been received successfully, station would makes 1 long beep, and ready
to send the data. If the station can not receive the server response, it would make 3
short beeps and 1 long beep and shut down automatically.
When you have inset the SIM card, please replace the back case on the station.
