Troubleshooting
69
Troubleshooting
The battery does not charge properly.
• Ensure that your device and the charging cable is connected and the
LED lamp is working properly.
• If the battery does not charge completely, it may be dead or defective.
Replace a battery with new one. (The warranty period for battery
replacement is six months.)
The battery life got shorter.
When you use network data or peripheral device such as wireless LAN
or Bluetooth that require more power, your device may use more
battery than usual. If it happens for an extended period of time, your
battery may be dead. Then replace it with a new battery.
I dropped the device in the water.
Turn off the device and take out the battery. Place the device and
battery in a dry place. Let them dry completely for a considerable
period of time, and turn it back on. If it does not turn back on, contact
our service center.
My device gets too hot to touch.
It is normal to get warm if receiving poor signal, performing intense
workload, or battery is charging. It should not last if you stop using the
device for a certain amount of time. If the problem continues, contact
the manufacturer for persistent or extreme heat. It may result in a burst
battery or fire.
Summary of Contents for BM180
