7.2
Welcome Screen
The first time the pump is powered on, or after a factory reset, the pump will boot up to the
Welcome Screen. Follow the onscreen instructions to configure your A3 pump. Refer to
section 11 of this manual to change any of these options after you have finished the initial
configuration.
Welcome Screen Configuration
1
Local Language
2
Set Time
&
Local Date
&
Local Time Zone
&
Local Time
3
Set Name
&
Pump Name
&
Chemical Name
4
Set Units
&
Unit of Volume
&
Unit of Time
5
Set Tube Type
6
Set User Password
Page 19
®
FLEXFLO A3
7.0
Startup
7.1
Powering On The Pump
The A3 is equipped with a rocker switch to power ON/OFF the pump. Ensure that the power
cord is securely plugged into the corresponding power source before powering on the pump.
“I” is pressed to turn on the pump
“O” is pressed to turn off the pump
Page 18
®
FLEXFLO A3
7.0
Startup
