Blue-White industries FLEXFLO A1A Series, Operating Manual

Page: 13 / 32

>
Use the voltage for which the power cord is rated.
>
Do not strap together control (input/output) cables and power cables.
>
When there is a power interruption, the pump, which has an auto-restart feature, will restore the pump to the
operating state it was in when the power was lost.
>
POWER: 115V60Hz (0.6A max.), 220V50Hz (0.3A max.), 230V60Hz (0.3A max.), 230V50Hz (0.3A max.),
240V50Hz (0.3A max.)
NOTE : Contact a licensed electrician when there is doubt regarding the electrical installation.
6.0 POWER CONNECTIONS
Page 12
®
FlexFlo A1A
Risk of electric shock – cord connected models are supplied with a grounding conductor and
grounding-type attachment plug. To reduce risk of electric shock, be certain that it is connected
only to a properly grounded, grounding-type receptacle.
WARNING
Electrical connections and grounding (earthing) must conform to local wiring codes. Be certain
that a grounding conductor is connected to terminal T11-1 located in wiring compartment.
WARNING
Risk of electric shock - Disconnect electricity before removing wiring compartment cover.
WARNING
Ensure to connect the pump to the proper supply voltage. Using the incorrect voltage will
damage the pump and may result in injury. The voltage requirements is printed on the pump
serial label.
WARNING
Page 13
7.0 TOUCHPAD LAYOUT
®
FlexFlo A1A
All Flashing = TFD (tube failure detection)
GPD (US gallons per day)
All Flashing = TFD (tube failure detection)
L/H (Litres per hour)
All Flashing = TFD (tube failure detection)
Feed Rate Units
Input
Signal
Signal
Start / Stop
A1A - FLEXFLO
Acid and Liquid Chlorine Feeder
00
1
2
3
4
5 5 6
7 5 8
9
10
Item Number Item
1 LED/LCD Readout
2 Unit of Measurement
3 Rate Display Key
4 M8 Input Key
5 Remote Start/Stop Key
6 Lock-Out Key
7 Prime Key
8 Start & Stop Key
9 Down Key
10 Up Key