5
INTAKE TO PUMP AND RETURN WATER HOSE
CONNECTION KIT INSTALLATION
CAUTION:
+H[QWTRQQNFQGUPQVJCXGRTGEWVQRGPKPIUHQTVJGUMKOOGTCPFTGVWTPYCVGTƂVVKPI
follow the
Metal Wall Pool Manual
for cutting the holes for the intake to pump and water return
connections.
1. Install the pool liner per the instructions in the Cobalt and Capri Pool installation manual.
2. Fill the pool with water between 1 to 2- in below the position of the intake to pump connector kit
hole. (see diagram 1)
CAUTION:
Carefully trim the liner vinyl from the intake hole making sure not to cut beyond the
edge of the hole. See the warning statement below.
5ETGYVJGKPVCMGVQRWOREQPPGEVQTMKVVQVJGRQQNYCNN/CMGUWTGVJG6GƃQPVCRGKUYTCRRGFCPF
coats the thread of the intake connector. Screw the remaining parts of the intake connector kit into
position. (See diagram 2). This is part #10 in the parts list.
1PEG[QWJCXGKPUVCNNGFVJGKPVCMGVQRWOREQPPGEVQTMKV[QWYKNNPGGFVQEQPPGEVVJGƂNVGT
JQUGQPVJGQWVUKFGGPFQHVJGEQPPGEVQTMKVCPFVQVJGKPVCMGRQUVQP[QWTƂNVGTU[UVGORGTVJG
KPUVTWEVKQPKPVJGƂNVGTOCPWCN#VVCEJVJGTGVWTPYCVGTJQUGVQ[QWTƂNVGTU[UVGOCPFEQORNGVGVJG
CUUGODN[QH[QWTƂNVGTU[UVGOEWTTGPVN[DWV
DO NOT PLUG IT IN
. Plug the open end of the return
water hose.
%QPVKPWGƂNNKPIVJGRQQNDWVUVQRVQKPEJGUDGNQYVJGTGVWTPYCVGTJQNG
CAUTION:
Carefully trim the liner vinyl from the return hole making sure not to cut beyond the
edge of the hole.
5ETGYVJGYCVGTTGVWTPEQPPGEVQTMKVVQVJGRQQNYCNN/CMGUWTGVJG6GƃQPVCRGKUYTCRRGFCPF
coats the thread of the return connector. Screw the remaining parts of the return connector kit into
position. (See diagram 3) This is part #13 in the parts list and has the return eyeball for the inside of
the pool wall.
7. Once you have installed the return water connector kit you will need to connect the return water
hose from your pump to the outside end of the connector kit.
CAUTION:
You can expect to have some water come out of the hose when you remove the plug.
You will want to have the hose clamp already on the hose and make this connection quickly to
avoid excess water loss.
(KPKUJƂNNKPIVJGRQQNOCMKPIUWTGVJCVVJGYCVGTNKPGKUPQOQTGVJCPKPHTQOVJGVQRQHVJGYCNN
(QNNQYVJGKPUVTWEVKQPUDGNQYHQTCUUGODN[CPFEQPPGEVKQPQH[QWTƃQCVKPIUMKOOGTVQVJGKPUKFGQH
the pool.
WARNING!
Never permanently install the skimmer, intake, and return connector kits before the water
is within a few inches of them, the water pressure helps the liner to become properly taut and allows
UOCNNCFLWUVOGPVUVQDGOCFGDGHQTGƂPCNKPUVCNNCVKQP
