Troubleshooting
Symptom
Possible reason(s)
Solution(s)
• Electrical outlet/
• Check if electrical socket you are using is working by plugging
GFCI tripped
another know working electr
i
ca
l
appliance into the socket
• Plug is not
and check to see if the GFCI triggered. Reset it if needed.
connected properly
• Unplug the power supply for 30 seconds. Plug back in power
Robot is not
to outlet
supply and press the power button
moving/ Pump is
• No/not enough
• Check all connections from robot to power supply
not operating
power is going to
• Unplug power supply and take robot out of water.Open the
robot
cleaner to inspect the cleaner. Check that there no foreign
• An object is
object in the impeller. Check that there is no foreign object
blocking robot's
blocking the rollers
rollers or impeller
• Contact 8streme at www.8streme.com
• Check that the power supply plugged in
Robot is moving
• An object is
• Unplug power supply and take robot out of water.
Open the cleaner to inspect the cleaner. Check that
in only 1
blocking robot's
there no foreign object in the impeller. Check that
direction
rollers or impeller
there is no foreign object blocking the rollers.The
rollers should spin easily and freely.
Robot does not
• Clogged/fu
ll
bag
• Clean the filter bag. Clean fine filter pad if used
• An object is stuck
• Check if the filter bag frame is inserted properly.
pick up debris
in impeller or grill
• Check that there is no foreign object in the
when running
• Robot is moving
impeller or lodged in the grill above the impeller
over it
too fast
• Adjust the speed setting to a lower level.
13
Summary of Contents for Indigo Hybrid x-5
Page 1: ...8STREME Instruction Manual...
