TOP PANEL
•
Locate the TOP PANEL (2). If necessary, unscrew the
MAINTENANCE PANEL (1) from the top of the TOP PANEL
(2).
•
Align top panel on top of sauna, feed connectors through
the guide holes in the left front and back corner of the top
panel.
•
Using a ladder, connect the 2 circuit connectors located in
the front area of the top (c).
•
Connect the plug located in the back corner of the top (d).
•
Replace top MAINTENANCE PANEL (1) – panel can be
secured with screws if desired, but is not necessary.
(c)
(d)
ACCESSORIES
•
Secure the towel rack to the inside of the door, using the
pre-drilled holes in the middle position. Secure the
magazine rack to the inside of the glass door, using the pre-
drilled holes in the bottom position.
•
Locate the RADIO (13) and WOOD RADIO/UTILITY
HOUSING BOX (14).
•
Connect the circuit connector (e)
•
Install the RADIO (13) into the front of the HOUSING BOX
(14). Plug (2) connectors into the rear of radio (f).
•
Feed the ionizer plug through the hole so that it’s
accessible from the outside of the housing box.
•
Secure the HOUSING BOX (14) to the walls of the sauna
with 4 screws (g). May use a power drill if necessary.
•
Screw in the COLOR THERAPY LIGHT BULB (16), & add
batteries to the light remote to operate. Plug the cord into
the IONIZER (15), secure ionizer onto the outside of the
radio housing box (h).
•
Plug sauna into wall outlet –
always unplug sauna when it
is not in use.
(e)
(f)
(g)
(h)
13
14
15
16
